【Mediaedge】Transmission System Cam-Site Unit

This optical transmission device also supports QDCAM. This camsight unit ME-BXC-CU100/100T is used with the base unit ME-BXC-BU100/100T to transmit signals via an optical camera cable. By using it in combination with QDCAM, it is possible to perform transmission that eliminates imaging timing deviations due to differences in cable length. It can also be used as a general-purpose optical transmission device.

Local Delivery

CHINAM is currently shipping within Hong Kong and specific countries only. We use local courier service as our delivery company. We do not support shipping items in a single order to multiple shipping addresses. To ship items to an additional address, please place a new order to us. Unless otherwise specified, delivery charge at the rate of HK$300 will be imposed on each delivery. We currently offer free delivery for each order over HK$1,000.

For remote areas or outlying islands delivery service, please contact our sales team via email - sales@chinam.com.hk

International Delivery

We will do our best to ship internationally to countries where we do not have sales representation. Please register with us, we’ll keep you updated and notify you when this is about to happen and become available in your region. Please note, at this time the customer is responsible for the duties and taxes imposed by their country.

For international shipping please contact our sales team via email - sales@chinam.com.hk

Deliver Time

  • Once your order has been handed over to the carrier for delivery, you will receive a shipment notification email with an estimated delivery date. Please note that it is not possible to expedite your delivery and receive your package earlier than the scheduled delivery date. Therefore, we are unable to accept requests for expedited delivery. Our carriers are unable to provide an exact time of day for your delivery. If you ordered multiple items, you may receive separate shipments.
  • All estimates are based on business days. We only make deliveries in the specified areas of Hong Kong from Monday to Sunday except on the first two days of the Lunar New Year and when typhoon warning signal No. 8 or above or black rainstorm warning is in force.
  • All rescheduling of delivery, additional purchases, new sales memos and amendments must be made 3 days before the scheduled delivery date. Otherwise, a double delivery charge will be incurred.
  • We may deliver the merchandise in one or more installments, and some of the merchandises may be delivered directly from suppliers. Any times and dates given for dispatch of merchandise, or the length of time that merchandise will take to be delivered, are only estimates. If we are unable to meet any stated dispatch or delivery dates or times we will inform you as to the progress of your order. You agree and accept that under no circumstances will we accept cancellation of order or refund.

Signature On Delivery

  • Most of our shipments contain valuable items. If you will not be in attendance to accept delivery of your purchase, consider shipping to someone you trust will be able to sign for your package. For your convenience, you may prefer to have your order delivered to your office address. If you choose this option, please include the name of your business in the address. Please note, if you choose this option, goods may be left with reception or the Mail Room.
  • As our carriers require a signature on delivery, the carrier will leave a calling card if you are not at home. Please contact the carrier to reschedule delivery.
  • For postal deliveries, no signature is required and order status tracking is not available.
  • Delivery failure due to no one answering the door upon the arrival of goods at the appointed time, or to circumstantial limitations such as the entrance being too small, will require a rescheduled delivery and therefore incur double delivery charges.
  • We will deliver the merchandise ordered by you to the address you give us for delivery at the time you make your order through our staff or a third party provider. You agree to present your photo identification upon request when you acknowledge receipt of the merchandise. The merchandise shall be, and shall be deemed to be, delivered and accepted by you when the merchandise are delivered to the address you give us for delivery. You agree and accept that we are entitled, at our option, to charge you additional costs or cancel your order in the event of your failure to accept delivery for whatever reasons.

General

  • You will become the owner of the merchandise you have ordered when they have been delivered to you. Once merchandise has been delivered to you they will be held at your own risk and we will not be liable for the loss or damage.
  • You may not export any products purchased at CHINAM online store. We sells and ships products to end-user customers only. Notwithstanding order confirmation, CHINAM may cancel any order where it has reasonable grounds to believe the product is not being purchased for end use.
  • If there is any inconsistency or ambiguity between the English version and the Chinese version, the English version shall prevail.
  • We reserve the final right to terminate or alter the above terms and conditions. In the event of any dispute, our decision shall be final and conclusive.
In stock (contact us for lead time)
SKU
ME-BXC-CU100
Write Your Own Review
You're reviewing:【Mediaedge】Transmission System Cam-Site Unit
Your Rating

ME-BXC-CU100 Specification

Compatible optical camera cable
  • SMPTE 311M camera cable (SMPTE 304 connector)
  • Optical camera cable with OPS2401-P plug
    OPS2403-J jack manufactured by Tajimi Electronics Co., Ltd.
Optical signal output Laser 1: Wavelength 1310nm Light level -5 to 0 dBm
Laser 2: Wavelength 1550nm Light level -9 to -3 dBm
Class 1 laser product
optical signal loss 7dB or more
camera control signal RS-422 communication baud rate 115,200bps
External device control signal RS-232C communication Baud rate 115,200bps or less
Camera power supply output DC13.8V to 15.0V Max 13W
Power-supply voltage When power is supplied from the base unit DC18V to 48V When power
is supplied from the battery DC12V to 17V When
power is supplied from the XLR-4pin connector DC12V to 17V
power consumption 14W (excluding camera power supply)
operating temperature -5℃~+45℃
operating humidity 30% to 90% (no condensation)
mass 1.26kg
Size 150mm(W) x 150mm(D) x 60mm(H) (excluding protrusions)
Page Title

【Mediaedge】Transmission System Cam-Site Unit

HK$59,990.00