Hollyland Solidcom M1 Full Duplex Wireless Intercom System (4 Beltpack)

With major technical breakthrough, Hollyland is proud to present you a whole new series of full-duplex wireless intercom - Solidcom. As the first member of this series, Solidcom M1 is your go-to choice for micro-mid events with a capacity from 100 to 1000 guests, including church events, electronic field productions, exhbitions, concerts, etc.

200 -7KHz Frquency Range, 16KHz Sampling Rate, Enhanced Audio Quailty, Let Your Voice be Heard Crisp and Loud

With an all-round upgrade, Solidcom M1 guarantees smooth and clear group communication no matter how loud and complicated the background noise is.

Intuitive Grouping At a Single Tap

Setting up groups with Solidcom M1 is an intuitive experience. It's as easy as selecting the numbers of specific beltpacks and making them a group. Either through the base station, Solidcom APP or webpage, a group can be created and managed in seconds. The system supports up to 3 grouping, you can flexibly allocate the beltpacks to team members such as lighting crew, camera crew, PAs, etc.

Multi-device Cascade Connection For Hassle-free Group Communication

Fitted with 4 different interfaces : 2W (XLR connector), 4W (RJ45), POE/LAN power supply and cascading interfaces, the base station can be cascaded to multiple sets of different audio equipment only by connecting with a standard network cable or an XLR cable.

Each set of Solidcom M1 is equipped with 8 beltpacks. Simultaneous group calls for 16 people in 3 groups are made possible with 2 cascaded sets, with a standard network cable of 328ft (100m) for cascading, sufficient for staff dispatching of most events.

Born Rugged, Take It Anywhere With You

- Adopting double injection molding technology, the beltpack weights only 200 grams. The matte finish of it gives a comfortable grip and also makes it scratch-proof.

- With the lanyard loop on the back clip, you can either attach the beltpack to your waistband or hang it in front of your chest with a strap.

- The antenna of the beltpack is of detachable design, making it easy to replace and, moreover, enhancing the durability of the whole set.

Ergonomic Button Layout For Smooth & Precise Operation

- Taking user's work practices into consideration, the button layout of the beltpack is ergonomically designed. Initiating/ending group calls can be done by one tap on the Talk/Mute button on top of the beltpack.

- The three function buttons on the front of the device are of different shapes to avoid misclicking in emergencies.

- The beltpack is fitted with an HD LCD screen that shows all the info you will need at a glance.

Out-of-the-box Convenience

The beltpacks are paired by factory default and are good to use out of the box. In the event of cross-area collaboration where changing or adding beltpacks is needed, users only need to connect the beltpacks to the base station via USB to Type-C cables to pair and group the beltpacks.

A Plethora of Choices For Your Ears

Solidcom M1 comes standard with professional LEMO headphones whose microphones can be switched on by putting down the microphone boom or vice versa. The headphone is also featured with the Sidetone function which allows the user to hear his own voice even with the headphone on and then adjusting speaking volume in time.

*The beltpacks can also be connected to headsets with 3.5mm connectors, offering more possibilities for personalized use.

Say No To Low-battery Anxiety

Each beltpack is equipped with 2 removable Li-ion batteries which can be charged independently and are fully charged in only 2.5 hours. With a 6-hour runtime of each battery, the beltpack will never be out of power when using the two batteries in turn.

Holyland Solidcom M1 Station

Interfaces :
- POE Interface (RJ45)
- Power Supply Interface (RJ45)
- 4 Wire Audio Interface
- USB Interface
- 2 Wire Audio Interface

Power Supply : POE Power Supply, NP-F Type Battery

Frequency Response : 200Hz to 7KHz

Signal-to-Noise Ratio : >50dB

Distortion : Use Range 450 : Meters Line-of-Sight Usage

Frequency Band : 1.9GHz

Modulation Mode : GFSK

Transmit Power : Maximum 21dBm

Receiving Sensitivity : ≤-93dBm

Frequency Bandwidth : 1.728MHz

Power Consumption : <3W

Dimension : (L*W*H) : 255.5*180.4*48.5mm

Weight : About 1560g

Working Temperature : 0～+45℃(Working Status), -20～+60℃(Stock Status)

Holyland Solidcom M1 Beltpack

Interfaces :
- 3.5mm Headset Interface
- LEMO Headset Interface
- USB-Type-C Interface

Power Supply : 1500mAh Lithium Polymer Battery

Frequency Response : 200Hz to 7KHz

Signal-to-Noise Ratio : >50dB

Distortion : Use Range 450 : Meters Line-of-Sight Usage

Frequency Band : 1.9GHz

Modulation Mode : GFSK

Transmit Power : Maximum 21dBm

Receiving Sensitivity : ≤-93dBm

Frequency Bandwidth : 1.728MHz

Power Consumption : <0.6W

Dimension : (L*W*H) : 105*65*22.4mm

Weight : About 200g

Working Temperature : 0～+45℃(Working Status), -20～+60℃(Stock Status)

- Holyland Solidcom M1 Station x1
- Holyland Solidcom M1 Beltpack x4
- Holyland Solidcom Charging Base x1
- Holyland Solidcom LEMO Single-Ear Headset x4
- High Gain Omnidirectional Antenna x2
- POE Adapter x1
- RJ45 to XLR Transferring Cable (5 meters) x1
- USB-Type-A to Type-C Transferring Cable x1
- 4Pin XLR Adapter x1
- Battery for Beltpacks x8
- 3/8 Installing Accessory x1